Skip to content

Stamp Duty on House and Land Packages: Why You Pay Less

With a house and land package, you only pay stamp duty on the land. Here is how it works and how much you save compared to buying established.

Ashleigh Blake

share

When you buy a house and land package in Victoria, stamp duty is calculated on the land component only. Not the build. Not the total contract price. Just the land. That single distinction can save you tens of thousands of dollars compared to purchasing an established home at the same price point, and it remains one of the most overlooked financial advantages of building new.

This article breaks down exactly how stamp duty on a house and land package is calculated, why the land-only rule applies, and how much you actually save at every price point that matters in Melbourne’s growth corridors.

How stamp duty is calculated on a house and land package

In Victoria, stamp duty (formally called land transfer duty) is a state government tax paid when you purchase property. The amount you owe is determined by the dutiable value of the property, which is the price stated in your contract of sale or the market value of the property, whichever is greater.

For a house and land package, the key distinction is that you enter into two separate contracts. The first is a contract of sale for the land with the developer. The second is a building contract for the house with the builder. Because these are two independent agreements, the State Revenue Office (SRO) assesses duty only on the land contract.

The current Victorian general rates for land transfer duty are calculated on a marginal basis:

  • Up to $25,000: 1.4% of the dutiable value
  • $25,001 to $130,000: $350 plus 2.4% of the amount over $25,000
  • $130,001 to $960,000: $2,870 plus 6.0% of the amount over $130,000
  • $960,001 to $2,000,000: a flat 5.5% of the total dutiable value

These rates apply from the 2025/26 financial year and remain current as of May 2026. A principal place of residence (PPR) concession offers lower rates on properties valued up to $550,000, but for most house and land buyers purchasing land in the $280,000 to $400,000 range, the general schedule is the relevant starting point for calculating duty on the land component.

Why you only pay duty on the land component

The reason you pay stamp duty on the land only comes down to how the transaction is legally structured.

When you buy an established home, you purchase an existing property in a single transaction. The house and the land are sold together under one contract, so the SRO applies duty to the full purchase price.

When you buy a house and land package, the land purchase and the building contract are treated as separate transactions. You settle on the land first and pay duty on that settlement. The building contract with your builder is a construction agreement, not a property transfer, so it does not attract duty.

This is not a loophole or a concession. It reflects the legal reality that stamp duty is a transfer duty. It applies when ownership of real property changes hands. A building contract is an agreement to construct something on land you already own. There is no transfer of property, so there is no duty.

There are important conditions that must be met for this treatment to apply:

  • The land contract and the building contract must be genuinely separate and independent agreements
  • The contracts should be with different parties (a developer for the land, a builder for the construction)
  • The land must be vacant at the time of purchase
  • The building contract should not be a condition of the land contract, and vice versa

Where a house and land package is structured as a single turnkey contract with one party selling a completed home, the SRO may assess duty on the combined value. This is why most reputable house and land operations, including Senka Homes, structure packages with separate land and building contracts to ensure buyers receive the stamp duty benefit.

How much you save compared to buying an established home

The savings are substantial and scale with the total package price. To illustrate, consider the following comparison at four common price points across Melbourne’s outer suburbs and growth areas.

Total Price Established Home Duty H&L Package (Land Value) H&L Duty (Land Only) You Save
$500,000 $25,070 $250,000 $10,070 $15,000
$600,000 $31,070 $300,000 $13,070 $18,000
$700,000 $37,070 $350,000 $16,070 $21,000
$800,000 $43,070 $350,000 $16,070 $27,000

In each case, the house and land package assumes a land component at roughly 50% of the total price for the $500,000 to $700,000 examples, and a $350,000 block for the $800,000 package (reflecting the reality that land prices in growth corridors plateau while build specifications increase).

At the $600,000 mark, which is a common entry point for three and four bedroom homes in Melbourne’s western and northern growth corridors, the stamp duty saving is $18,000. That is real money that stays in your pocket or reduces the size of your construction loan.

At $800,000, the gap widens to $27,000. That figure alone could cover upgraded flooring, stone benchtops, and landscaping across the entire property.

Residential land estate in Melbourne

Worked example: stamp duty on a $600K established home vs a $600K H&L package

To make the comparison concrete, here is a step by step calculation at the $600,000 price point.

Scenario A: Buying a $600,000 established home

The full $600,000 is the dutiable value. Applying the general rate schedule:

  • First $25,000 at 1.4% = $350
  • $25,001 to $130,000 at 2.4% = $2,520
  • $130,001 to $600,000 at 6.0% = $28,200

Total stamp duty: $31,070

Scenario B: Buying a $600,000 house and land package

The package consists of a $300,000 land contract and a $300,000 building contract. Only the $300,000 land value is dutiable:

  • First $25,000 at 1.4% = $350
  • $25,001 to $130,000 at 2.4% = $2,520
  • $130,001 to $300,000 at 6.0% = $10,200

Total stamp duty: $13,070

The difference

Building new saves you $18,000 in stamp duty on a $600,000 package. That figure does not include any first home buyer exemptions or concessions, which can reduce the duty further or eliminate it entirely.

To put it another way, the buyer of the established home pays stamp duty on $600,000. The buyer of the house and land package pays stamp duty on $300,000. Same total price, very different tax outcome.

How this combines with the first home buyer stamp duty exemption

If you are a first home buyer in Victoria, the stamp duty advantage of a house and land package is even more significant.

Under the current first home buyer duty exemption, eligible purchasers pay no stamp duty when the dutiable value of the property is $600,000 or less. A concessional (reduced) rate applies for properties valued between $600,001 and $750,000.

Here is how this interacts with a house and land package.

First home buyer purchasing a $600,000 established home: The dutiable value is $600,000. This sits right at the exemption threshold, so the buyer pays $0 in duty. But if the property were even $1 more, the concession rate would apply, and they would start paying.

First home buyer purchasing a $700,000 established home: The dutiable value is $700,000. This falls in the concession band ($600,001 to $750,000), so the buyer pays a reduced but still meaningful amount of duty.

First home buyer purchasing a $700,000 house and land package (land at $350,000): The dutiable value is $350,000, which is the land contract only. This is well under the $600,000 exemption threshold, so the buyer pays $0 in duty. Zero.

This is the critical insight that most buyers miss. With a house and land package, the first home buyer exemption threshold applies to the land price, not the total package price. A first home buyer could purchase a $750,000 house and land package with a $350,000 land component and pay no stamp duty at all. Try doing that with an established home at the same price.

For eligible first home buyers building with Senka Homes, this means packages in the $600,000 to $800,000 range will often attract zero duty, because the land component in Melbourne’s growth corridors typically falls between $280,000 and $400,000.

You can read more about eligibility and how to apply in our guide to the stamp duty exemption for first home buyers in Victoria.

What this means for your total upfront costs

Stamp duty is usually the single largest upfront cost after your deposit. Reducing or eliminating it has a direct impact on how much cash you need to get started and how much you end up borrowing.

Consider the total upfront position for a $650,000 purchase:

Established home at $650,000:

  • Deposit (10%): $65,000
  • Stamp duty: $34,070
  • Legal and conveyancing: $1,500
  • Total upfront: approximately $100,570

House and land package at $650,000 (land $320,000, build $330,000):

  • Deposit on land (10%): $32,000
  • Stamp duty on land: $14,270
  • Legal and conveyancing: $1,500
  • Total upfront: approximately $47,770

The difference in upfront cash required is over $50,000. Part of that is the reduced deposit (you only need 10% of the land price, not 10% of the total), and part is the reduced stamp duty. Together, these two factors make a house and land package significantly more accessible than buying established, particularly for buyers working with limited savings.

For a detailed breakdown of how construction loans work alongside these savings, see our guide to construction loans explained. And if you are also eligible for the First Home Owner Grant in Victoria, that is an additional $10,000 towards your new home, further reducing the cash you need upfront.

Facade of a home built by Senka Homes

Frequently asked questions

Do I pay stamp duty on the full house and land price?

No. When you purchase a house and land package with separate land and building contracts, stamp duty is assessed on the land contract only. The building contract is a construction agreement, not a property transfer, and does not attract land transfer duty in Victoria. This means your dutiable value is typically 40% to 55% of the total package price, depending on the land to build ratio in your chosen area.

How is stamp duty calculated on new builds in Victoria?

For a new build purchased as a house and land package, stamp duty is calculated using the standard Victorian land transfer duty rates applied to the land value only. The general rates range from 1.4% on the first $25,000 up to 6.0% on values between $130,001 and $960,000. If the land value falls under the first home buyer exemption threshold of $600,000, eligible buyers may pay no duty at all.

How much stamp duty on a $350,000 block in Victoria?

On a $350,000 block of land, the stamp duty calculation under the general rate schedule is: $350 on the first $25,000, plus $2,520 on the next $105,000, plus $13,200 on the remaining $220,000. The total comes to $16,070. If you are an eligible first home buyer, you would pay $0 as the value is well below the $600,000 exemption threshold.

Is stamp duty cheaper when building?

Yes. Building a new home through a house and land package almost always results in lower stamp duty than purchasing an equivalent established home. This is because duty is assessed on the land value only, not the total package price. On a typical $600,000 package, the saving is around $18,000 compared to buying an established home at the same price. For first home buyers, the land only assessment often means the entire duty is waived under the exemption threshold, which would not be possible on a $600,000 or $700,000 established property.

Fixed price contracts are available on Senka house and land packages and dual occupancy projects, subject to site findings, with turnkey completion available as an option. Custom builds and knockdown rebuilds are priced to the individual site and scope. Your building contract sets out exactly what is included for your project.

WRITTEN BY

Ashleigh Blake

READ NEXT

More on this topic

Double storey home built by Senka Homes, facade lit in the evening

Architectural Design Without Architect Cost: The Third Option Most People Miss

How to get architectural quality without paying architect fees. The third option between project builders and full custom architects, and how Senka delivers design led homes.
White rendered double storey home by Senka Homes at dusk

Hamptons Style Home in Australia: What It Is, What It Is Not, and Whether It Works in Melbourne

What defines a Hamptons style home, whether it works in Melbourne, and how to incorporate Hamptons elements without committing to a full theme.
BoxHill Crayo

Is Building a Home Worth It in 2026? The Honest Case for Building Now

With costs rising everywhere, is building still a smart move? Here is the honest case for building a new home in Melbourne right now.

NEWSLETTER

Don't miss the next one

One email per month. Articles like this, market data, and build cost trends.

1,200+ subscribers · Unsubscribe anytime